paragraph: An omnidirectional measurement microphone with an individual calibration profile. Every microphone has been measured by Sonarworks acousticians against an ANSI-certified measurement microphone. This means perfect accuracy within the audible range and freedom from sample-to-sample irregularities.

,
paragraph: Every user can download a 21-day trial for SoundID Reference for Speakers & Headphones. Enjoy unlimited functionality and finally hear how your speakers really sound!

,
heading: Microphone specification,
list: Houses pre-polarized electret-condenser capsule, Frequency response: 20 Hz – 20kHz with supplied calibration profile, Omnidirectional polar pattern, Sensitivity is rated at -37dB/Pa (14 mV), Self-noise: 24 dB, S/N ratio: 70 dB, Dynamic range: 106dB, Maximum SPL: 132 dB SPL,
heading: System requirements for SoundID Reference compatibility,
list: Valid license for SoundID Reference for Speakers and Headphones, or SoundID Reference for Multichannel, 2.0 stereo speaker system, or a multichannel speaker system, XLR to XLR audio cable, Microphone stand for multichannel system measurements, Audio interface requirements during the speaker measurement process:, +48v Phantom Power support, The same audio interface must be used for input/output, The audio interface must support and be set to one of the following sample rate formats: 44.1kHz, 48kHz, 88kHz, 96kHz, 192kHz, The audio hardware setup must consist of a single external hardware device only (additional preamp units are supported)
mac:
ram: 0
disk: 0
version: Mac: macOS 10.14; 10.15; 11 Big Sur; 12 Monterey, 13 Ventura
internet_required: No
windows:
ram: 0
disk: 0
version: Windows 10; 11
internet_required: No